HDMI HDBaseT Extender with Auxiliary Audio
SB-6320T4 / SB-6320R4
HDMI HDBaseT Extender with Auxiliary Audio
HDBaseT Transmit :
HDMI, Audio, Ethernet, RS-232 and IR in-out.
  • Introduction
  • Features
  • Specifications
  • SB-6320T4 / SB-6320R4 HDMI HDBaseT Extender with Auxiliary Audio
  • 1. HDBaseT Extend HDMI with 3D and 4Kx2K over a single UTP/STP cable up to 330ft (100M).
    2. Support HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant.
    3. Support link speeds of up to Video, TMDS format Max. 10.2 Gbit/s, Signal 340MHz.
    4. Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels.
    5. Support 1080p TV’s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS.
    6. Support Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master
      Audio uncompressed HD audio formats.
    7. Transfer Bi-directional Infrared control signal together with the HDMI signal.
    8. Support DVI Auxiliary Audio (stereo audio) input and S/PDIF (PCM) output.
    9. RS-232 port for firmware update or RS-232 control signal transmission.
    10. Support HDMI CEC between your connected Source and display gear..
    11. With LED indicators to show the POWER/HDMI/HDCP/LINK status.
    12. Transmits HDMI video & audio, Ethernet, RS-232 and Bi-Directional IR.
    13. Support Super Audio CD (DSD), CEC commands protocol table.
    14. Mounting Ears and wall mount pack supplied.
    15. Power supply using universal power switch 50/60Hz,100~240VAC.
  • 1. Type of Extender: HDBaseT Transmitter for HDMI signal over category UTP/STP Cable.
    2. Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp
    3. HDBaseT Signal Supports: HDMI 1.4a HDMI format Standard, DVI and HDCP Compliant
    4. Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to
        10.2 Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D.
    5. HDMI Audio I/O Supports: Multi Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital,
        Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD,
        DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
    6. Extra DVI Audio input: HDBaseT Transmitter Input audio: Stereo Audio (3.5mm OD Jack).
    7. S/PDIF Audio output: HDBaseT Receiver Output audio: S/PDIF(PCM-2CH, RCA connector).
    8. Category Cable Support: CAT5e, CAT6, CAT6a, CAT7 UTP/STP category Lan cable.
    9. Support HDMI resolutions: 480p, 720p 1080i/1080p and Ultra HD 4K2K.
    10. Scan Rate Accepted: Support HDMI full HD Resolution; Frequency 24Hz to 240Hz.
    11. Controls: 1x IR in, 1x IR out, 1x Rs232 I/O and 2x LAN series interface.
    12. PoE Support : (optional)
    13. Transfer distance: Up to 330ft (100 meters).
    14. HDMI I/O connectors: HDMI Type A - SMD 19pin Female Type
    15. HDBaseT I/O connectors: HDBaseT RJ-45, 8p8c Female socket.
    16. Safety Approvals: CE, FCC, VCCI & REACH
    17. Dimensions (LxWxH): 5.31" x 5.11” x 1" (135mm x 130mm x 26mm)
    18. Shipping Weight (net): 0.4675 kgs / 1.0285 lb
    19. Power consumption : Max. 850mA (Full load 1080p-60Hz signal with use DC12V input)
    20. Power Supply: Power Input +12VDC, 2A (Universal Type 50/60Hz, 100~240 VAC).